Differences

This shows you the differences between two versions of the page.

--- quick_start_guide [2024/02/11 17:01] – trmg
+++ quick_start_guide [2024/02/11 17:22] (current) – trmg
@@ Line 9: / Line 9: @@
 After you've picked a prefix, you will want to choose at least one trunking technology to use for SCDP. Trunking technology support varies among participants, but the following are used in varying degrees:
-===== CEMoIP ISDN PRI =====
+===== VPN tunnel required =====
-This trunking method requires a Cisco Integrated Services Router or similar that can support a Channelized T1/E1 Circuit Emulation Module like the [[https://www.ebay.com/sch/i.html?_from=R40&_nkw=NM-CEM-4TE1&_sacat=0&_sop=15|NM-CEM-4TE1]].  This is a close as we can get to a "TDM" trunking experience.  However, it does require that you also establish IP peering with the network via VPN tunnel (WireGuard is most common, but other technologies can be supported if needed) and, preferably, BGP.
+==== CEMoIP ISDN PRI ====
+This trunking method requires a Cisco Integrated Services Router or similar that can support a Channelized T1/E1 Circuit Emulation Module like the [[https://www.ebay.com/sch/i.html?_from=R40&_nkw=NM-CEM-4TE1&_sacat=0&_sop=15|NM-CEM-4TE1]].  This is a close as we can get to a "TDM" trunking experience.  However, it does require that you also establish IP peering with the network via VPN tunnel (WireGuard is most common, but other technologies can be supported if needed) and, preferably, BGP.
-===== H.323 =====
+==== H.323 ====
 This is the preferred trunking method if you have a Cisco Integrated Services Router or other H.323 capable device in your voice network. More detail TBD